If you want to configure TP link modem connection so, it is not tough at all but you need to follow the
instructions that can easily help in configuring TP link easily. In this
article we are explaining steps for howto configure tp link modem device at your network connections.
Step 1:
First need to link the 3G Modem to the USB port behind of
the TP-Link TL-MR3220 Router.
Then go to connect the 3G modem
Socket the network wire to your PC and the other finish of
the cable into your modem.
Move the TP link on and just wait at least for 1-2 minutes to
make it boot up.
Step 2:
Next open an internet browser page and type: 192.168.1.1
into the address bar.
Step
3:
You will bedriven for a Username and Password. Type the
following:
1.
Username: admin
2.
Password: admin
Step 4:
Go to Quick Start available on left hand side.
Step 5:
Click to 3G Only, followed by the Next key.
Step 7:
Select the right wireless settings for your network.
WPA-PSK/WPA2-PSK is suggested.
Step 8:
The router is properly configured now; you have to restart
the device to finish the process. To perform this need to enter the boot up
button on the screen.
Next you need to allow 1-2
minutes for the boot up to occur and you must be able to access the internet.
No comments:
Post a Comment